Audio-Technica AT-33 Sa
Moving Coil Cartridge.
The AT33Sa is the first Audio-Technica MC cartridge model to feature a Shibata stylus. In addition to its superior high-range performance as a line-contact stylus, the Shibata stylus produces mid and bass sound that is strong and rich. The Shibata stylus is mounted on a boron cantilever with a double damper to greatly improve sound quality.
Moving Coil Cartridge.
The AT33Sa is the first Audio-Technica MC cartridge model to feature a Shibata stylus. In addition to its superior high-range performance as a line-contact stylus, the Shibata stylus produces mid and bass sound that is strong and rich. The Shibata stylus is mounted on a boron cantilever with a double damper to greatly improve sound quality.
Moving Coil Cartridge.
The AT33Sa is the first Audio-Technica MC cartridge model to feature a Shibata stylus. In addition to its superior high-range performance as a line-contact stylus, the Shibata stylus produces mid and bass sound that is strong and rich. The Shibata stylus is mounted on a boron cantilever with a double damper to greatly improve sound quality.
Advanced Tapered Boron Cantilever and Reduced Weight
The AT33Sa uses a tapered boron cantilever. Tapering the cantilever and revising the number of coil rotations reduce the weight, giving the cartridge better high range performance and wide range reproduction.
Neodymium Magnet with Dramatically Enhanced Magnetic Energy and Permendur Yoke
The model uses a neodymium magnet with maximum energy product BHmax of 50 [kJ/m3] and a permendur yoke with high saturation flux density and outstanding magnetic properties, which further enhances the concentrated magnetic field of the coil gap.
Neodymium Magnet for Dramatically Increased Magnetic Energy
The neodymium magnet provides maximum energy (BHmax of 50[kJ/m3]), while the pure iron yoke provides excellent magnetic properties.
-
Frequency Response: 15 - 50,000Hz
Channel Separation: 30dB (1kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force: 1.8 to 2.2 g (standard 2.0 g)
Stylus Construction: Nude square shank
Recommended Load Impedance: Min 100Ω
Coil Impedance: 10Ω (1kHz)
DC Resistance: 10Ω
Coil Inductance: 22 µm (1kHz)
Output Voltage: 0.4mV (1kHz and 5cm/sec.)
Output Channel Balance: 0.5dB (1kHz)
Stylus Shape: Shibata
Cantilever: Nude tapered boron
Static Compliance: 40×10-6cm/dyne
Dynamic Compliance: 10×10-6cm/dyne (100Hz)
Mounting: 1/2” centers
Dimensions: H16×W16.6×D26.5mm
Accessories Included: 1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)
Body Material: Aluminium/Synthetic Resin
Stylus Curvature Radius: Shibata
Type: Dual Moving Coil
Weight: 6.9g
-
